MANTUS GALVANIZED ANCHOR 17 LB
Double-tap and hold to zoom.
Mouse over the image to zoom.

MANTUS GALVANIZED ANCHOR 17 LB

Product Code: MANGV17

DIGS LIKE NO OTHER The Mantus Anchor is designed to penetrate dense, grassy bottoms and set with unparalleled holding power. When tested, our anchors set faster and deeper than any other tested anchor, including Rocna, Manson Supreme, Bulwagga, Fortress, Bruce, CQR and Danforth anchors.

EASY TO STORE The Mantus Marine anchor lineup simply has the best boat anchors available, whether you are a long-range cruiser, racing or going out for a day sail. The Mantus quick-set anchor is stowable and breaks down for easy storage, so you can store one or two as spares without taking up much needed boat space.

 BUILT STRONG

Formed out of high-quality steel plate. Contains no cast parts.
Shank and shank boot are welded from top and bottom.
Shank and roll bar are bolted to the fluke.
ASTM certified steel bolts are oversized with a large margin to ensure safety.
Although the shank is attached to the fluke with 4 bolts, a single bolt has sufficient strength to handle the maximum expected load on the anchor. Bolt Details.
Stainless Steel anchors feature a 2205 Duplex shank and 316L stainless steel fluke. The surface is hardened by shot-peening and then electro-polished to provide maximum corrosion resistance.
In the carbon steel version every part of the anchor system is hot-dipped galvanized for corrosion protection. (All shanks are HT ASTM 514 Steel and flukes are mild steel A36 equivalent)
Sharp-headed nose is precision machined to achieve the perfect chisel shape to achieve maximum penetrating power.
LIFE TIME WARRANTY Mantus Anchors offers a lifetime warranty on its anchors *see Warranty section for details.


After the release of the Mantus M2 Model we often get the question: which one is better?  Both Anchors have an amazing setting and resetting ability and both are excellent choices for a primary anchor, but each has its own small specific advantages.  Both anchors roll over well in most bottom conditions and it is rare for a properly weighted anchor to end up upside down, nevertheless  M1 Anchor due to its rollbar is better at rolling over in a really soft silty bottom. The M2 anchor is less likely to get plugged up with muddy weeds, and without the need for the roll bar M2 is less bulky. Thus the M2 model provides a better fit for boats with bow pulpits with slotted anchor housing and bow sprits.
  • Suggested Retail Price: $439.99